Wisycom LFA-B-F2 Antenna
Wisycom LFA Wideband Active Antenna
Wideband Active Antenna with remote controlled filters
LFA is a directional antenna with a unique design to achieve an ultra-wideband of 410-1300 MHz, a compact and rugged form factor and a reduce wind resistance. LFA integrate a unique bank of filters along with a low noise amplifier. Filters and gain can be easily setup locally thru a 4 key navigation buttons and a TFT display or remotely with a data connection on the same RF coaxial cable. Using the latest Wisycom filter technology, LFA gives a full control of RF zones and allows to build flexible and remote controllable antenna systems.
Huge reception band: 410-1300 MHz
Remote controllable thru coax cable
RF gain from -12 to +27 dBu (1 dB step)
Easy configuration thru a TFT display
Tunable filter for interference control
Antenna off for RF zone disabling
Fixed band saw filter
Skeletal design for low wind loading
3 High Pass & 3 Low Pass filters
Waterproof with gasket sealing
| undefined | Description |
|---|---|
| FREQ RANGES | 410 ÷ 1300 MHz |
| Tunable: 410 ÷ 750 MHz (UHF), 30MHz of BW | |
| Fixed: 935 ÷ 960 MHz (F1), 1240 ÷ 1260MHz (F2) | |
| Selectable band pass filter: HP 410/470/510 MHz, LP 600/700/810 MHz (other see filter option) | |
| POLARIZATION | Vertical |
| RADIATION | Directional |
| CONNECTOR | N or BNC |
| IMPEDENCE | 50 Ω |
| BOOSTER GAIN | -12 ÷ 27 dB typical (1 dB step selection) |
| 0.8 dB attenuation (bypassed) | |
| BOOSTER GAIN FLATNESS | ± 1 dB, in the whole working window |
| DISPLAY | TFT – transflective (176 x 176 pixels, RGB) |
| POWER SUPPLY | +12 V, 100mA |
| MATERIAL | epoxy fiberglass with skeletal design |
| FINISHING | black matte textured weather resistance coating |
| MOUNTING | 5/8” with worth or 3/8” with adapter |
| DIMENSIONS | 276 x 336 x 61 mm (HxWxD) |
| WEIGHT | 550 g |
Lectrosonics SMDWB Tx
Lectrosonics SMQV Tx
Lectrosonics SMV Tx
Lectrosonics SMWB Tx
Lectrosonics SRC Tx
Lectrosonics UCR411 Rx
Lectrosonics VRT2 Modules in A1 and B1
Lectrosonics WM Tx